One transducer object can define 1 to 4 sensors of different type. Each of these can be active or not.
There is only one NMEA 0183 formatter available: the $--XDR sentence formatter.
If you need more than 4 sensors you can create as many Transducer objects in NemaStudio as you require.
 Tag
Any name you like to give to this transducer set
|
|
 Sensor is active
Check if this sensor is active and should transmit its values,
uncheck if the sensor is inactive and data is not sent
|
|
 Sensor type
Defines the sensor type:
-
temperature C
-
angular displacement A
-
linear displacement D
-
frequency F
-
force N
-
pressure P
-
flow rate R
-
tachometer T
-
humidity H
-
volume V
|
|
 Sensor reading value
Sensor reading value
Can be positive or negative, 4 decimal places are allowed.
(Note: the up/down control increases with 1/10, if you need more precise
values you need to enter the value manually here.)
|
|
 Units of Measure
Measuring Unit:
-
C = degrees Celsius
-
D = degrees ("-" = anticlockwise)
-
M = meters ("-" = compression)
-
H = Hertz
-
N = Newtons ("-" = compression)
-
B = Bars ("-" = vacuum)
-
l = liters/second
-
R = RPM
-
P = Percent
-
M = cubic meters
Note: there is no validity checking against the sensor type,
so it is quite possible to have a frequency sensor to output in liters per minute or so.
|
|
 Identifier
Give any name as identifier for this sensor
|
|
