The AIS Base Station will transmit AIS Message Type 4.
Operation
After clicking the "Start" button the AIS simulation will start, and the messages will be sent to the selected output port of the PC, until the "Stop" button is pressed. Note that only those messages will be sent that are checked.
All messages are shown in the I/O Port Monitor as they are output. When logging is ON (toolbar option), the sentences will also be written to the user selected log file.
Clicking the "Stop" button will suspend the operation, until "Start" is clicked again.
When the Transmit Interval is set to 0.0 the sentences are output as "single shot" each time you click the "Start" button.
Clicking the little X top-right will exit the object and save optionally all current values, so that next time the target is opened it can continue where it stopped. Note: saving is an optional setting in the
General Settings.
A short description of each field follows.
 MMSI number
9-digit MMSI number.
Auto generated by NemaStudio when instantiating a new object.
Can be changed at will.
|
|
 Tag
For easy identifying the object in e.g. the Object Control Center
|
|
 UTC
Universal Time Coordinate.
Gives real time UTC, cannot be changed
|
|
 Position Device
Type of electronic position device.
0 = undefined (default)
1 = GPS
2 = GLONASS
3 = combined GPS/GLONASS
4 = Loran-C
5 = Chayka
6 = integrated navigation system
7 = surveyed
8 = Galileo
9-15 = not used
|
|
 Position Accuracy
The position accuracy (PA) flag
|
|
 RAIM
RAIM flag
|
|
 Checksum
Check this if you want a checksum added to each sentence
|
|
 Latitude/Longitude
The geographical location of the Base Station. To change: place the mouse cursor left of the leftmost digit. Then just start typing the latitude or longitude, the cursor will advance automatically and the value will be automatically formatted.
|
|
